Anchor™ Safe - Anti-slip carpet in a roll - 90cm x 30.5 m

Technical sheet:

• Keeps floors dry - Moisture barrier prevents liquids from seeping onto the floor
• Stays in place - Adhesive backing keeps mat flat and in place, even with heavy cart and buggy traffic
• Safe - Certified High Traction by the National Floor Safety Institute (NFSI)
• Odor resistant - Antimicrobial treated to protect against odor
• Dries quickly - The pad quickly disperses water for quick drying
• Easy installation - Cut individual mats from the roll as needed
• Problem-free - the mat can be left in place during daily cleaning; floor cleaners, vacuum cleaners and mops will pass without damage
• With normal use, it will work for up to 4 months.

Recommended use:

Recommended for use in areas where additional traction or slip resistance is required.

Especially popular in restrooms, grocery stores, convenience stores, medical facilities and retail stores.

Available size:

90x30.5 cm

Technical information:

• FIBER TYPE: Non-woven PET (polyester)
• SUBSTRATE TYPE: Removable adhesive
• WEIGHT: 540g/m²
• THICKNESS: 1.9 mm
• DIMENSION: 91cm x 30.48 m
• MOISTURE BARRIER: Polyester film
• Complies with DOC-FF-1-70 flammability standard
• Water absorption: +- 38 liters per roll
• Certified high traction NFSI

• min. order: from 1 pc

MAINTENANCE INSTRUCTIONS:

• Do not lift the mat to clean the floor underneath until you are ready to replace the mat.

• You can leave the anti-slip mats in place during regular cleaning. Floor cleaners, vacuum cleaners, brooms and mops pass directly over without damaging the surface of the mat.

•Tougher stains can be pre-treated with standard carpet cleaners and brushed to loosen dirt.

•Mats  they are designed to dry quickly, however standard fans or floor blowers can be used to speed up drying.

• In extremely humid conditions, use a dedicated vacuum cleaner or extractor to remove water

• Mats  they are designed to last up to 4 months with normal use. Mats should be replaced if they show signs of wear, damage or a weakened bond to the floor and should always be replaced within 4 months regardless of wear.

 INSTALLATION INSTRUCTIONS:

• The floor must be clean and dry.
• Measure the required length and place the cutting board under the mat at the place of the cut.
• Use a safety knife to cut the mat.
• Place the mat where you want it, then use the cutting board to press and smooth the mat into place.
• Cut the corners at a 45-degree angle using the cutting guides on the board.