Bartex™ Cotton- absorbent entrance mat
Bartex Cotton mats have a non-slip rubber base and highly absorbent cotton pile designed to capture dust, dirt and moisture at your door, thus providing a safe entry zone.
- 100% cotton fibers offer excellent water and dirt absorption.
- The cotton carpet with a weight of 930 gr/m² is ideal for preventing unwanted dirt and moisture from entering the premises
- 100% EXS nitrile rubber backing prevents creasing and cracking in all weather conditions.
- Please note that the size of the mat has a +-2% tolerance in size, as the rubber contracts and expands
Recommended use:
Recommended for indoor commercial use in entrances, lobbies, reception areas or wherever additional traction or humidity control is required.
USE:
- Inputs
- Corridors
- Elevators
- Reception
Technical information:
• YARN: 100% cotton KCT2
•CONSTRUCTION: Cut Tufting yarn net 930g/m²
• SUBSTRATE: Polyester polyamide, non-woven fabric, 120 g/m²
• BACK FINISH: Nitrile rubber
• RUBBER THICKNESS: 1.6 mm
• EDGE WIDTH: 1.5 cm
• EDGE THICKNESS: 2.8 mm
• TOTAL HEIGHT: 12 mm
• TOTAL WEIGHT: 3.1 kg/m²
• WATER ABSORPTION: +- 6.1 kg/m²
• Dimensions tolerance: +/- 2%
• FLAMMABILITY: T-a (Din 54332 - DIN 66081) - B1 (Din 4102/14) - Euroclasses Cfl-s1 VAPOR DENSITY: B1
• min. order: from 1 pc
DIMENSIONS:
60 x 85 cm
75 x 85 cm
80 x 120 cm
85 x 150 cm, 85 x 300 cm
120 x 180 cm, 120 x 200 cm, 120 x 240 cm
150 x 200 cm, 150 x 300 cm
Special sizes available.
200x200*, 200x300*
Maximum size:: 200 x 1000 cm or 240 x 550 cm
MAINTENANCE INSTRUCTIONS:
Packaging mats can be cleaned in several different ways.
- Industrial washing (see Washing Instructions)
- Regular vacuuming: daily in high-traffic areas, weekly in lower-traffic applications
- After cleaning, lay flat and dry
- Mats should always be dry before being put back into service and cooled before being rolled up.
WASHING INSTRUCTIONS:
• If you want to industrially wash the Bartex™ Cotton mats, follow the instructions below.
- Rinse, 2-3 min. at the middle water level with a maximum temperature of 49°C
- Rinse (optional), 2-3 min. at the middle water level with a maximum temperature of 27 °C
- Break, 5-10 min. on a high water level with a maximum temperature of 49 °C
- Rinse, 2 min. on high water level with low temperature
- Rinse, 2 min. on high water level with low temperature
- Extraction at low speed, 1-2 min.
- Shaking with drum rotation, 1 min.
- Extract, maximum 250G, 3-5 min.
- Szšenie (optional), 15-30 min. with a maximum bin temperature of 82 °C
- Cooling 5 min.
Other recommendations:
• All solution-dyed Bartex™ Cotton mats can be washed together.
• For heavily soiled mats, increase the temperature up to max. 60 °C
• The break should not exceed pH 9.5; use non-ionic detergents with a low pH
• To prevent pilling on other mats, cotton mats should not be washed with mats made of nylon or other synthetic carpet yarns.
• Do not cross the mats; The temperature in the dryer basket should not exceed 82 °C.
• Make sure the cotton pads are thoroughly dried to prevent mold growth in the cotton yarn.
• After removing from the washing machine, lay the mats flat; let the mats cool down before rolling them up.
Technical sheet:
Additional parameters
Category: | Cleaning zone |
---|---|
? Place of use: | interior |
Be the first who will post an article to this item!