Karaat™ - entrance cleaning mat - textile
Recommended for indoor commercial use in entrances, lobbies, reception areas or wherever additional traction or moisture control is needed.
USES:
- Entrances
- Corridors
- Elevators
- Receptions
Karaat™ mats have a non-slip rubber backing with a 2 cm rubber edge, The carpet surface is designed to absorb dust, dirt and moisture at your door and provide a safe space for your entryway.
Technical information:
• YARN: Continuous filament solution-dyed nylon, Nylon type 6
• TWIST: Each strand of yarn contains two layers of fiber
• YARN WEIGHT: 820gr/m²
• PILE LENGTH: 10 mm
Karaat mats have a non-slip rubber backing and the surface of the carpet is dyed with a solution that is designed to stop dust, dirt and moisture at your door and provide a safe space for your entry.
- Solution-dyed nylon fibers provide excellent color fastness
- LUTRADUR primary substrate does not fray, reduces pilling and provides a strong bond between rubber and carpet
- High Twist heat-set nylon fibers are resistant to crushing and allow dirt to filter into the mat so that it does not remain on the surface of the carpet
- Fade / UV resistant
- Please note that the size of the mat has a +-2% tolerance in dimension, as the rubber contracts and expands
Recommended use:
Recommended for indoor commercial use in entrances, lobbies, reception areas or wherever additional traction or moisture control is required.
USE:
- Inputs
- Corridors
- Elevators
- Reception
Technical information:
• YARN: Nylon dyed with continuous fiber solution, Nylon type 6.
•TWIST: Each skein of yarn contains two layers of fiber that have been twisted individually 5.5 turns per 2.5 cm and then twisted together at 4.5 turns per 2.5 cm. The yarn is then heat treated to permanently maintain the hard twist.
• YARN WEIGHT: 820gr/m².
• HAIR THICKNESS: 10 mm.
•STATIC CONTROL: Rated to less than 1KV in AATCC134 electrostatic susceptibility test. Meets IBM testing requirements.
• TOTAL WEIGHT: 2.82 kg/m².
• PRIMARY SUBSTRATE: Freudenberg LUTRADUR Polyester non-woven fabric spun 130 gr/m².
• BACK FINISH: 100% nitrile rubber for maximum oil resistance, weight reduction and flexibility. Die-cut with reinforced edges on all four sides.
• EDGE THICKNESS: 2.5 mm
• BODY THICKNESS: 1.5 mm
• EDGE WIDTH: 2 cm
• Dimensions tolerance: +/- 2%
• FLAMMABILITY: Complies with EN ISO 9239-1 (2010) standards
• min. order: from 1 pc
DIMENSIONS:
60 x 85 cm,
75 x 85 cm
85 x 115 cm, 85 x 150 cm, 85 x 300 cm
115 x 180 cm, 115 x 200 cm, 115 x 240 cm, 115 x 250 cm, 115 x 300 cm
150 x 200 cm, 150 x 240 cm, 150 x 250 cm, 150 x 300 cm
Special sizes available.
200x200*, 200x300*
Maximum size: 200 x 550*
* 200 cm width is only available for orders over 100 m² and more
CHOICE OF COLOR COMBINATIONS:
The mats are available in Anthracite, Black Mink, Blue, Blue Steel, Brown, Grey, Red, Slate Grey, Clear Granite, Clear Black, Clear Red.
MAINTENANCE INSTRUCTIONS:
Karaat mats can be cleaned in several different ways.
- Industrial washing (see Washing instructions)
- Regular vacuuming: daily in high-traffic areas, weekly in lower-traffic applications
- After cleaning, lay flat and dry
- Mats should always be dry before being put back into service and cooled before being rolled up.
WASHING INSTRUCTIONS:
• If you want to industrially wash Karaat mats, follow the instructions below.
- Rinse, 2-3 min. at the middle water level with a maximum temperature of 49°C
- Rinse (optional), 2-3 min. at the middle water level with a maximum temperature of 49 °C
- Break, 2-3 min. on a high water level with a maximum temperature of 49 °C
- Rinse, 2 min. on high water level with low temperature
- Rinse, 2 min. on high water level with low temperature
- Extraction at low speed, 1-2 min.
- Shaking with drum rotation, 1 min.
- Extract, maximum 250G, 3-5 min.
- Szšenie (optional), 5-10 min. with a maximum bin temperature of 82 °C
- Cooling 5 min.
Other recommendations:
• All solution-dyed mats can be washed together.
•In case of heavily soiled mats, increase the temperature up to max. 71 °C
•The break should not exceed pH 9.5; use non-ionic detergents with a low pH
•Do not move the mats; The temperature in the dryer basket should not exceed 82 °C
•If the mats are not dried, the final rinse can be increased to 49 °C. This will reduce moisture retention after extraction
•After removing from the washing machine, lay the mats flat; let the mats cool down
before rolling them up
Technical sheet :
<a title="quality entrance cleaning mat GDmatsEU"
Additional parameters
Category: | Cleaning zone |
---|---|
? Place of use: | interior |
Be the first who will post an article to this item!
Only registered users may submit ratings. Please log in or sign up.
Be the first who will post an article to this item!